資通國際應材有限公司

one-touch Method 
Possible to install easily the tent with One-Touch method)


Frame Connection
In the coupling rods, user can put Aluminum pipes and assemble easily with a philips screwdriver.


Doors and Handles
Easy to open or close doors with a conductive fastener and middle holder.


1.Doors and Handles  2.Fastener – Ending point  3.Fastener Replacement
If fastener is broken due to long-term use, user can remove velcros in both size.


Power-tube Connection
Power and signal line path
Standard size : φ100mm X L1000mm
Suppress EMI inflew of the tent
To increase shielding effectiveness, EMI filter box can be used for supplying signal and power.


Power-tube / EMI filter box Connection
Power and signal line path
Standard size : φ100mm X L1000mm
Suppress EMI inflew of the tent
To increase shielding effectiveness, EMI filter box can be used for supplying signal and power.


Inside of Air-Filing hole/honeycomb
Air-Filing hole to supply air into inside of the tent
Size of Air-Filing hole:Ø50㎜ x 300㎜(L)
Air-blower specification(recommend): ex)If tent size is 1500X1500X2000(㎜), the air-blower of air volume 300㎥/h is suitable.


Air-blower Connection
Conductive mesh layer is placed between Transparent Plastic tubes so electromagnetic waves are blocked and inside monitoring is available.
Size of Air-Filing hole:Ø50㎜ x 300㎜(L)
Air-blower specification(recommend): ex)If tent size is 1500X1500X2000(㎜), the air-blower of air volume 300㎥/h is suitable.


Shielding Monitor Window
Conductive mesh layer is placed between Transparent Plastic tubes so electromagnetic waves are blocked and inside monitoring is available.
Material of conductive mesh layer: plating fabrics or stainless steel
If conductive mesh consists of dual-layers, shielding effectiveness is improved more.


Air-blower Window
It put out the air inside of the tent. It consists of conductive mesh or honeycomb so 
electromagnetic waves are blocked and air is pass through the air-blower window.)